You may need just a short part of a recording: a voice instruction, a sound effect you own or the useful section of an interview you are authorized to edit. A browser audio cutter can handle a small selection without installing a full editing workstation, provided you understand its supported input and output.
ToolsOnDuty Audio Cutter decodes supported audio locally and exports the selected range as 16-bit PCM WAV. This walkthrough uses an original three-second mono test tone. The screenshots show the actual loaded source and prepared selection, and the downloaded WAV header and duration were checked.
Choose a source the browser can decode
Open Audio Cutter and select your source through Audio file. The browser may decode WAV, MP3 and other audio formats, but support depends on the actual codec, container and browser. A filename extension alone does not guarantee compatibility.
Inputs are limited to 25 MiB, five minutes, mono or stereo, and 32 million decoded samples. The tool also needs readable, finite duration metadata before decoding. A small compressed file can require much more memory when decoded, so file size is only one of the limits.
Use a copy of your source and retain the original. This tool extracts a time range; it does not provide multitrack mixing, automatic silence detection, noise removal or a full mastering workflow.
Follow the three-second example
Our source was an original mono WAV containing a three-second tone at 44,100 Hz. After loading it, the workspace showed 3.000 seconds, one channel and 44,100 Hz decoded. The tone is only demonstration media, not a recording taken from another creator.
For a similar duration and size check, use an authorized mono source with at least 1.5 seconds of audio. The content can differ; the selected range and channel count determine the exported PCM frame count. A stereo source produces more data than the mono example, even for the same duration.
Set the selection boundaries in seconds
The expected duration is end minus start: 1.5 minus 0.5 equals one second. Entering end as 1.0 would produce a half-second selection, not a one-second clip. Use full audio restores the complete source range, after which you need to prepare the preview again.
- Enter 0.5 under Start (seconds). This begins the selection half a second into the source.
- Enter 1.5 under End (seconds). End is the position in the source, not the desired clip length.
- Set Output filename to one-second-selection or another descriptive name.
- Check that start is earlier than end and that the end does not exceed the source duration.
- Click Prepare selection preview to generate the clip you will actually inspect.
Listen to the prepared clip, not just the original
Original audio plays the source file. Prepared selection plays the newly generated WAV for the selected interval. Use that second player to check the beginning, ending and intended content before downloading. In our test it reported 1.000 seconds and 16-bit PCM WAV.
If you change start or end, the previous prepared preview is invalidated. Prepare it again so the audio you inspect corresponds to the current range. This avoids downloading a clip while mentally comparing it to an earlier selection.
Click Download prepared WAV after checking the preview. Export selection as WAV is an alternative that prepares and downloads the selected range directly. For important edits, the preview-first route makes it easier to spot an unintended word cutoff or missing sound.
Understand the exported WAV size
The tool decodes at 44,100 samples per second and exports 16-bit PCM. Each sample therefore uses two bytes per channel. One second of mono data contains 44,100 times 2, or 88,200 bytes of audio. The simple WAV header adds 44 bytes, giving the verified total of 88,244 bytes.
A one-second stereo selection uses two channels and roughly twice the audio data, with the same small header overhead. Longer ranges scale similarly. The workspace's displayed size is rounded, so use the actual downloaded byte count when checking an exact requirement.
A WAV can be substantially larger than a source MP3 because PCM is uncompressed. That is expected and does not mean the cut failed. If your delivery platform specifically needs compressed audio, use an appropriate separate encoding workflow rather than renaming the WAV extension.
Sample boundaries and lossless claims
Audio is stored as discrete samples rather than an infinitely precise time line. Selection boundaries round outward to decoded sample boundaries, so some ranges can be slightly longer than the subtraction of decimal inputs suggests. At 44,100 Hz, a single sample represents about 0.023 milliseconds.
The example's 0.5 and 1.5 second positions align exactly with that sample rate, which is why its exported duration was exactly one second. Do not assume every arbitrary decimal boundary will have the same property.
Resampling and conversion to 16-bit PCM can change the source representation. Cutting a compressed file through decoding and WAV export is not lossless MP3 editing, even when no audible difference is obvious. Keep the original for future work and avoid claiming that the export is bit-for-bit identical to the source.
Troubleshoot codec, range and playback problems
Only edit audio you own or are permitted to use. Local processing avoids uploading the recording for this operation, but the downloaded file can still contain confidential speech. Review it before sending it to someone else, and store it according to the sensitivity of the source.
- The file cannot load: check the actual codec and duration metadata, then try a supported browser or convert an authorized copy with suitable software.
- The range is rejected: verify finite numeric values, start before end and boundaries within the source.
- The preview no longer appears: changing the selection clears the old prepared clip. Generate a new one.
- The clip sounds cut off: listen to the prepared output and adjust the range around the intended phrase.
- The file is much larger: WAV is uncompressed PCM; compare duration and channels rather than expecting MP3-sized output.
- The result vanished after reload: the workspace does not autosave. Download before leaving.
Try the related tools
Apply the steps from this guide directly in your browser.
Frequently asked questions
Can this tool export MP3?
No. The output is 16-bit PCM WAV. Input MP3 support depends on browser decoding; it is not MP3 encoding or lossless compressed-audio cutting.
Is End the duration of the clip?
No. End is a position in the original source. Duration is approximately end minus start, with outward rounding to decoded sample boundaries.
Why is the WAV larger than my compressed source?
WAV output contains uncompressed PCM samples. Size depends on duration, 44,100 Hz sample rate, 16-bit samples and channel count.
Can I recover an unsaved selection after closing the tab?
No autosaved recovery is provided. Download the prepared WAV and keep your source file before navigating away or reloading.
